Simple Mail Transfer Protocol (SMTP) is an Internet standard In computer network engineering, an Internet Standard is a normative specification of a technology or methodology applicable to the Internet. Internet Standards are created and published by the Internet Engineering Task Force (IETF) for electronic mail Electronic mail, often abbreviated as email or e-mail, is a method of exchanging digital messages, designed primarily for human use. E-mail systems are based on a store-and-forward model in which e-mail computer server systems accept, forward, deliver and store messages on behalf of users, who only need to connect to the e-mail infrastructure, (e-mail) transmission across Internet Protocol The Internet Protocol is a protocol used for communicating data across a packet-switched internetwork using the Internet Protocol Suite, also referred to as TCP/IP (IP) networks. SMTP was first defined in RFC 821 (STD In computer network engineering, an Internet Standard is a normative specification of a technology or methodology applicable to the Internet. Internet Standards are created and published by the Internet Engineering Task Force (IETF) 10),^[1] and last updated by RFC 5321 (2008)^[2] which includes the extended SMTP Extended SMTP , sometimes referred to as Enhanced SMTP, is a definition of protocol extensions to the Simple Mail Transfer Protocol standard. The extension format was defined in IETF publication RFC 1869 (1995) which established a general structure for all existing and future extensions (ESMTP) additions, and is the protocol in widespread use today.

While electronic mail servers and other mail transfer agents A mail transfer agent (also called a mail transport agent, message transfer agent, or smtpd (short for SMTP daemon), is a computer program or software agent that transfers electronic mail messages from one computer to another use SMTP to send and receive mail messages, user-level client mail applications typically only use SMTP for sending messages to a mail server for relaying An open mail relay is an SMTP server configured in such a way that it allows anyone on the Internet to send e-mail through it, not just mail destined to or originating from known users. This used to be the default configuration in many mail servers; indeed, it was the way the Internet was initially set up, but open mail relays have become. For receiving messages, client applications usually use either the Post Office Protocol In computing, the Post Office Protocol is an application-layer Internet standard protocol used by local e-mail clients to retrieve e-mail from a remote server over a TCP/IP connection. POP and IMAP (Internet Message Access Protocol) are the two most prevalent Internet standard protocols for e-mail retrieval. Virtually all modern e-mail clients and (POP) or the Internet Message Access Protocol The Internet Message Access Protocol is one of the two most prevalent Internet standard protocols for e-mail retrieval, the other being the Post Office Protocol. Virtually all modern e-mail clients and mail servers support both protocols as a means of transferring e-mail messages from a server, such as those used by Gmail, to a client, such as (IMAP) to access their mail box accounts on a mail server.

History

Various forms of one-to-one electronic messaging were used in the 1960s. People communicated with one another using systems developed for specific mainframe computers. As more computers were interconnected, especially in the US Government's ARPANET, standards were developed to allow users using different systems to be able to e-mail one another. SMTP grew out of these standards developed during the 1970s.

SMTP can trace its roots to two implementations described in 1971, the Mail Box Protocol, which has been disputed to actually have been implemented,^[3] but is discussed in RFC 196 and other RFCs, and the SNDMSG program, which according to RFC 2235 by Ray Tomlinson of BBN "invents" for TENEX computers the sending of mail across the ARPANET.^[4][5][6] Fewer than 50 hosts were connected to the ARPANET at this time.^[7]

Further implementations include FTP Mail ^[8] and Mail Protocol, both from 1973.^[9] The work continued throughout the 1970s, until the ARPANET converted into the modern Internet around 1980. Jon Postel then proposed a Mail Transfer Protocol in 1980 that began to remove the mail's reliance on FTP.^[10] SMTP was published as RFC 821 in August 1982, also by Postel.

The SMTP standard was developed around the same time as Usenet, a one-to-many communication network with some similarities.

SMTP became widely used in the early 1980s. At the time, it was a complement to Unix to Unix Copy Program (UUCP) mail, which was better suited to handle e-mail transfers between machines that were intermittently connected. SMTP, on the other hand, works best when both the sending and receiving machines are connected to the network all the time. Both use a store and forward mechanism and are examples of push technology. Though Usenet's newsgroups are still propagated with UUCP between servers^[11], UUCP mail has virtually disappeared^[12] along with the "bang paths" it used as message routing headers.

The article about sender rewriting contains technical background info about the early SMTP history and source routing before RFC 1123.

Sendmail was one of the first (if not the first) mail transfer agents to implement SMTP.^{[citation needed]} Some other popular SMTP server programs include Postfix, qmail, Novell GroupWise, Exim, Novell NetMail, Microsoft Exchange Server, Sun Java System Messaging Server.

Message submission (RFC 2476) and SMTP-AUTH (RFC 2554) were introduced in 1998 and 1999, both describing new trends in e-mail delivery. Originally, SMTP servers were typically internal to an organization, receiving mail for the organization from the outside, and relaying messages from the organization to the outside. But as time went on, SMTP servers (Mail transfer agents), in practice, were expanding their roles to become message submission agents for Mail user agents, some of which were now relaying mail from the outside of an organization. (e.g. A company executive wishes to send e-mail while on a trip using the corporate SMTP server.) This issue, a consequence of the rapid expansion and popularity of the World Wide Web, meant that the SMTP protocol had to include specific rules and methods for relaying mail and authenticating users to prevent abuses such as unsolicited e-mail (spam) relaying.

As this protocol started out purely ASCII text-based, it did not deal well with binary files. Standards such as Multipurpose Internet Mail Extensions (MIME) were developed to encode binary files for transfer through SMTP. Mail transfer agents (MTAs) developed after Sendmail also tended to be implemented 8-bit-clean, so that the alternate "just send eight" strategy could be used to transmit arbitrary data via SMTP. Non-8-bit-clean MTAs today tend to support the 8BITMIME extension, permitting binary files to be transmitted almost as easily as plain text.

Many people contributed to the core SMTP specifications, among them Jon Postel, Eric Allman, Dave Crocker, Ned Freed, Randall Gellens, John Klensin, and Keith Moore.

Protocol overview

SMTP is a relatively simple, text-based protocol, in which a mail sender communicates with a mail receiver by issuing simple command strings and supplying necessary data over a reliable ordered data stream channel, typically a Transmission Control Protocol (TCP) connection.^[2] An SMTP session consists of a series of commands, initiated by the SMTP client, and responses from the SMTP server through which the session is opened, operating parameters are exchanged, the recipients are specified, and possibly verified, and the message is transmitted, before the session is closed. The originating host is either an end-user's email client also known as mail user agent (MUA), or a relay server's mail transfer agent (MTA).

SMTP was designed as an electronic mail transport and delivery protocol, and as such it is used between SMTP systems that are operational at all times. However, it has capabilities for use as a mail submission protocol^[2] for email clients (split user-agent) that do not have the capability to operate as MTA. Such agents are also called message submission agents (MSA),^[13] sometimes also referred to as mail submission agents. They are typically end-user applications and send all messages through a smart relay server, often called the outgoing mail server, which is specified in the programs' configuration. A mail transfer agent, incorporated either in the e-mail client directly or in the relay server, typically determines the destination SMTP server by querying the Domain Name System for the mail exchanger (MX record) of each recipient's domain name. Conformant MTAs fall back to a simple address lookup (A record) of the domain name when no mail exchanger is available. In some cases an SMTP client, even a server, may also be configured to use a smart host for delivery. The SMTP client typically initiates a Transmission Control Protocol (TCP) connection to the SMTP server on the well-known port designated for SMTP, port number 25.

SMTP is a delivery protocol only. It cannot pull messages from a remote server on demand. Other protocols, such as the Post Office Protocol (POP) and the Internet Message Access Protocol (IMAP) are specifically designed for retrieving messages and managing mail boxes. However, the SMTP protocol has a feature to initiate mail queue processing on a remote server so that the requesting system may receive any messages destined for it (cf. #Remote Message Queue Starting). POP and IMAP are preferred protocols when a user's personal computer is only intermittently powered up, or Internet connectivity is only transient and hosts cannot receive message during off-line periods.

Remote Message Queue Starting

Remote Message Queue Starting is a feature of the SMTP protocol that permits a remote host to start processing of the mail queue on a server so it may receive messages destined to it by sending the TURN command. This feature however was deemed insecure^[14] and was extended in RFC 1985 with the ETRN command which operates more securely using an authentication method based on Domain Name System information.

SMTP transport example

A typical example of sending a message via SMTP to two mailboxes (alice and theboss) located in the same mail domain (example.com) is reproduced in the following session exchange.

For illustration purposes here (not part of protocol), the protocol exchanges are prefixed for the server (S:) and the client (C:).

After the message sender (SMTP client) establishes a reliable communications channel to the message receiver (SMTP server), the session is opened with a greeting by the server, usually containing its fully qualified domain name, in this case smtp.example.com. The client initiates its dialog by responding with a HELO command identifying itself in the command's parameter.

S: 220 smtp.example.com ESMTP Postfix
C: HELO relay.example.org
S: 250 Hello relay.example.org, I am glad to meet you
C: MAIL FROM:<bob@example.org>
S: 250 Ok
C: RCPT TO:<alice@example.com>
S: 250 Ok
C: RCPT TO:<theboss@example.com>
S: 250 Ok
C: DATA
S: 354 End data with <CR><LF>.<CR><LF>
C: From: "Bob Example" <bob@example.org>
C: To: Alice Example <alice@example.com>
C: Cc: theboss@example.com
C: Date: Tue, 15 Jan 2008 16:02:43 -0500
C: Subject: Test message
C:
C: Hello Alice.
C: This is a test message with 5 header fields and 4 lines in the message body.
C: Your friend,
C: Bob
C: .
S: 250 Ok: queued as 12345
C: QUIT
S: 221 Bye
{The server closes the connection}

The client notifies the receiver of the originating e-mail address of the message in a MAIL FROM command. In this example, the email message is sent to two mailboxes on the same SMTP server: one each for each recipient listed in the To and Cc header fields. The corresponding SMTP command is RCPT TO. Each successful reception and execution of a command is acknowledged by the server with a result code and response message (e.g., 250 Ok).

The transmission of the body of the mail message is initiated with a DATA command after which it is transmitted verbatim line by line and is terminated with a characteristic sequence of a new line (<CR><LF>) with just a single full stop (period) followed by another line indication (<CR><LF>).

The QUIT command ends the session.

The information that the client sends in the HELO and MAIL FROM commands are added (not seen in example code) as additional header fields to the message by the receiving server. It adds a Received and Return-Path header field, respectively.

Optional extensions

Although optional and not shown in this example, many clients ask the server for the SMTP extensions that the server supports, by using the EHLO greeting of the extended SMTP specification (RFC 1870). Clients fall back to HELO only if the server does not respond to EHLO.

Modern clients may use the ESMTP extension keyword SIZE to query the server for the maximum message size that will be accepted. Older clients and servers may try to transfer excessively-sized messages that will be rejected after consuming network resources, including connect time to network links that is paid by the minute.

Users can manually determine in advance the maximum size accepted by ESMTP servers. The client replaces the HELO command with the EHLO command.

S: 220-smtp2.example.com ESMTP Postfix
C: EHLO bob.example.org
S: 250-smtp2.example.com Hello bob.example.org [192.0.2.201]
S: 250-SIZE 14680064
S: 250-PIPELINING
S: 250 HELP

Thus smtp2.example.com declares that it will accept a fixed maximum message size no larger than 14,680,064 octets (8-bit bytes). Depending on the server's actual resource usage, it may be currently unable to accept a message this large. In the simplest case, an ESMTP server will declare a maximum SIZE with only the EHLO user interaction.

Globalization

RFC 5336 provides a UTF8STMP extension which enables SMTP support for non-ASCII email addresses, such as Pelé@live.com (simple diacritic, still mostly Latin), δοκιμή@παράδειγμα.δοκιμή, and 测试@测试.测试. Though experimental, RFC 5336 is expected to be a final standard in Fall 2009, with a Chinese version to be published in Nov 2009.

Security and spamming

One of the limitations of the original SMTP is that it has no facility for authentication of senders. Therefore the SMTP-AUTH extension was defined. However, the impracticalities of widespread SMTP-AUTH implementation and management means that E-mail spamming is not and cannot be addressed by it.

Modifying SMTP extensively, or replacing it completely, is not believed to be practical, due to the network effects of the huge installed base of SMTP. Internet Mail 2000 was one such proposal for replacement.

Spam is enabled by several factors, including vendors implementing broken MTAs (that do not adhere to standards, and therefore make it difficult for other MTAs to enforce standards), security vulnerabilities within the operating system (often exacerbated by always-on broadband connections) that allow spammers to remotely control end-user PCs and cause them to send spam, and a lack of "intelligence" in many MTAs.

There are a number of proposals for sideband protocols that will assist SMTP operation. The Anti-Spam Research Group (ASRG) of the Internet Research Task Force (IRTF) is working on a number of E-mail authentication and other proposals for providing simple source authentication that is flexible, lightweight, and scalable. Recent Internet Engineering Task Force (IETF) activities include MARID (2004) leading to two approved IETF experiments in 2005, and DomainKeys Identified Mail in 2006.

General email processing model

The overall flow for message creation, mail transport and delivery may be illustrated as follows:

sending MUA → MSA → sending MTA → receiving MTA → MDA → receiving MUA

E-mail is submitted from an message user agent (MUA), the user's email client, to a mail server (MSA), usually using SMTP. From there, the MSA delivers the mail to an MTA, often running on the same machine. These functions may not be distinguished, or merged into one program, and a message may be directly submitted to an MTA: port 587 is used for submission to MSAs (thence to MTAs), while port 25 is used for transferring to MTAs.

The MTA looks up the destination mail exchanger records in the DNS, and relays the mail to the server on record via TCP port 25 and SMTP. Once the receiving MTA accepts the incoming message, it is delivered via a mail delivery agent (MDA) to a server which is designated for local mail delivery. The MDA either delivers the mail directly to storage, or forwards it over a network using either SMTP or the Local Mail Transfer Protocol (LMTP), a derivative of ESMTP designed for this purpose. Once delivered to the local mail server, the mail is stored for batch retrieval by authenticated mail clients (MUAs). Mail is retrieved by end-user applications, the email clients, using IMAP, a protocol that both facilitates access to mail and manages stored mail, or the Post Office Protocol (POP) which typically uses the traditional mbox mail file format. Webmail clients may use either method, but the retrieval protocol is often not a formal standard. Some local mail servers and MUAs are capable of either push or pull mail retrieval.

SMTP defines message transport, not the message content. Thus, it defines the envelope, such as the envelope sender, but not the headers or body of the message itself. For example, STD 10 and RFC 5321 define SMTP (the envelope), while STD 11 and RFC 5322 define the message (headers and body), formally referred to as the Internet Message Format (IMF).

Related Requests For Comments

• RFC 1123 – Requirements for Internet Hosts—Application and Support (STD 3)
• RFC 1870 – SMTP Service Extension for Message Size Declaration (оbsoletes: RFC 1653)
• RFC 2476 – Message Submission
• RFC 2505 – Anti-Spam Recommendations for SMTP MTAs (BCP 30)
• RFC 2920 – SMTP Service Extension for Command Pipelining (STD 60)
• RFC 3030 – SMTP Service Extensions for Transmission of Large and Binary MIME Messages
• RFC 3207 – SMTP Service Extension for Secure SMTP over Transport Layer Security (obsoletes RFC 2487)
• RFC 3461 – SMTP Service Extension for Delivery Status Notifications (obsoletes RFC 1891)
• RFC 3462 – The Multipart/Report Content Type for the Reporting of Mail System Administrative Messages (obsoletes RFC 1892)
• RFC 3463 – Enhanced Status Codes for SMTP (obsoletes RFC 1893 )
• RFC 3464 – An Extensible Message Format for Delivery Status Notifications (obsoletes RFC 1894)
• RFC 3834 – Recommendations for Automatic Responses to Electronic Mail
• RFC 4409 – Message Submission for Mail (obsoletes RFC 2476)
• RFC 4952 – Overview and Framework for Internationalized E-mail
• RFC 4954 – SMTP Service Extension for Authentication (obsoletes RFC 2554)
• RFC 5068 – E-mail Submission Operations: Access and Accountability Requirements (BCP 134)
• RFC 5321 – The Simple Mail Transfer Protocol (obsoletes RFC 821 aka STD 10, RFC 974, RFC 1869, RFC 2821)
• RFC 5322 – Internet Message Format (obsoletes RFC 822 aka STD 11, and RFC 2822)
• RFC 5336 - SMTP Extension for Internationalized Email Addresses (updates RFC 2821, RFC 2822, and RFC 4952)
• RFC 5504 - Downgrading Mechanism for Email Address Internationalization

URI scheme 'mailto'

The URI scheme, as registered with the IANA and notably used in the HyperText Transfer Protocol, defines the mailto: scheme for SMTP email addresses. Though its use is not strictly defined, URLs of this form are intended to be used to open the new message window of the user's mail client when the URL is activated, with the address as defined by the URL in the "To:" field. ^[15][16]

See also

• Bounce messages (SMTP non-delivery reports), bounce address
• Extended SMTP (ESMTP)
• Comparison of mail servers
• E-mail authentication
• SMTP-AUTH (ESMTPA)
• Ident
• Sender Policy Framework (SPF)
• E-mail encryption
• Variable envelope return path
• POP before SMTP / SMTP after POP

References

1. ^ RFC 821, Simple Mail Transfer Protocol, J.B. Postel, The Internet Society (August 1982)
2. ^ ^{a b c} RFC 5321, Simple Mail Transfer Protocol, J. Klensin, The Internet Society (October 2008)
3. ^ The History of Electronic Mail, Tom Van Vleck: "It is not clear this protocol was ever implemented"
4. ^ The First Network Email, Ray Tomlinson, BBN
5. ^ Picture of "The First Email Computer" by Dan Murphy, a PDP-10
6. ^ Dan Murphy's TENEX and TOPS-20 Papers
7. ^ RFC 2235
8. ^ RFC 469 - Network Mail Meeting Summary
9. ^ RFC 524 - A Proposed Mail Protocol
10. ^ RFC 772 - Mail Transfer Protocol
11. ^ http://tldp.org/HOWTO/Usenet-News-HOWTO/x64.html
12. ^ draft-barber-uucp-project-conclusion-05 - The Conclusion of the UUCP Mapping Project
13. ^ RFC 4409, Message Submission for Mail, R. Gellens, J. Klensin, The Internet Society (April 2006)
14. ^ RFC 1985, SMTP Service Extension for Remote Message Queue Starting, J. De Winter, The Internet Society (August 1996)
15. ^ RFC 2368 section 3 : by Paul Hoffman in 1998 discusses operation of the "mailto" URL.
16. ^ Description of mailto syntax

External links

• Internet mail infrastructure (cr.yp.to)
• SMTP reference manual (cr.yp.to)
• Tools in the war on mail loops (cr.yp.to)
• Essential Internet Protocols - SMTP
• SMTP Sequence Diagram (PDF)
• Diagram of e-mail flow (PDF, PNG )
• Troubleshooting SMTP in Thunderbird Includes information on getting around port 25 blocking.
• The Case For E-mail Security - Security and Insecurity in SMTP, POP and IMAP.
• Online tool to test any SMTP Server
• Online open relay tester for SMTP servers
• Configuring DNS for mail delivery
• Dealing with bounced on non delivery of SMTP mail
• Picture of the first computers to send and receive a network email, 2 PDP-10s
• Email Address Internationalization IETF Working Group

Categories: E-mail clients | E-mail | Internet mail protocols

See Also:

• Simple Mail Transfer Protocol
• Mail
• KMail
• Email
• Emails

What Links Here:

Recently Viewed Pages:

• E-mail: Dictionary
• ARPANET: Encyclopedia
• Computers: Internet: E-mail: Directory

Most Popular Pages:

• Computers: Internet: E-mail: Directory
• E-mail: Dictionary
• Simple Mail Transfer Protocol: Encyclopedia

Related 'Simple Mail Transfer Protocol' Searches: